Sells For Approx. $10.00 on Etsy
SUPPLIES
- 10-15 Scraps Fabric In various prints and sizes
- 1 piece Fabric 11″ x 16″ (for bib back)
- 1 piece Cotton Batting 11″ x 16″
- 1 Fat Quarter Fabric for binding
- 2 pieces Velcro 1″ x 1″
- 1 Bib Pattern Piece Follow instructions above to obtain the PDF
For Non-Scrappy Bib Add:
- 1 piece Fabric 11″ x 16″ for Bib Front
Quilting
- Begin by placing your first fabric scrap onto your bib piece. You can place it anywhere on the bib that you’d like.
- Sew the piece to the batting/fabric by sewing lines ¼” apart. Do not cut the thread in between lines. Instead, pivot the fabric, sew a ¼”, then continue sewing another line. You want to minimize how many thread cuts you have on the project since the quilting will show on the back of the bib.
- Cut a second scrap of fabric the same width as the first scrap.
- Place it on top of the batting/fabric, on top of your 1st scrap, right sides facing. Stitch it in place with a ¼” seam allowance. Flip the piece right side up, press in place, and add stitching lines using the same method you used for the 1st scrap.
- Keep adding scraps using this method.
- If you find that you need longer scraps (the strips will get longer as you add more scraps to the bib), you can sew two scraps together before adding them to the bib.
- Keep working until you have covered the entire bib area with quilted fabric.