Ruffled Leg and Back Fitted Baby Diaper – Sewing Projects to Sell

Step One: Cut out your pattern pieces just as you would to make a diaper. However add an extra 1/4 – 1/2 all the way around your pattern. Use print or solid polyurethane laminate outer and a microfleece or suedecloth inner layer. Use the same elastic anchor points but move them out towards the new edge so they are the same distance from the edge as they are on the diaper pattern.

Step Two: Apply the elastic either to just one inside layer, or to both using the blind method. Apply your snaps just like the pattern directs, though you’ll want to move them out a bit to line up with the new edge. Add two snaps about an inch apart to the back if you plan on using a Mini Diaper with your new pul shell.